This material is an EXTREMELY FLAMMABLE LIQUID and VAPOUR and an EYE IRRITANT. Before handling, it is extremely important that engineering controls are operating and that protective equipment requirements are being followed. People working with this chemical should be properly trained regarding its hazards and its safe use.

Eliminate all ignition sources (e.g. sparks, open flames, hot surfaces). Keep away from heat. Post NO SMOKING signs. It is very important to keep areas where this material is used clear of other materials which can burn. Electrically ground all drums, transfer vessels, hoses and piping. Ground clips must contact bare metal. When dispensing in other than a closed system, ensure dispensing container is bonded to receiving transfer equipment and container. Never perform any welding, cutting, soldering, drilling or other hot work on an empty vessel. To reduce the fire/explosion hazard, consider the use of an inert gas in the container or storage vessel. Use non-sparking ventilation systems, approved explosion-proof equipment and intrinsically safe electrical systems in areas of use. Keep aisles and exits free of obstruction. For large scale operations, consider the installation of leak and fire detection equipment along with a suitable, automatic fire suppression system.

Avoid generating vapours or mists. Prevent the release of vapours and mists into the workplace air. Wear appropriate personal protective equipment, if necessary, to avoid contact with this chemical and any contaminated equipment.

Use in smallest possible amounts in a well-ventilated area separate from the storage area. Do not use with incompatible materials such as oxidizers and acids. Vigorous reactions followed by fire or explosion could result. Test for peroxides before distilling. To avoid splashing, carefully dispense into sturdy containers made of compatible materials. Never transfer liquids by pressurizing the original shipping containers with air or inert gas. Do not dispense in storage area unless dispensing area is segregated by fire-resistant construction. Only use portable containers and dispensing equipment (faucet, pump, drip can) approved for flammable liquids. Never return contaminated material to its original container.

Label containers. Keep containers closed when not in use. Avoid damaging containers. Empty containers may contain hazardous residues. Follow handling precautions on Material Safety Data Sheet. Have suitable emergency equipment for fires, spills and leaks readily available. Practice good housekeeping. Maintain handling equipment. Comply with applicable regulations.